can i use wet wood to build deck

To learn more about wood so you can make better decisions about lumber, see When installing wet wood decking on decks that will get full sun Using wood that has been kiln dried after treatment will help, as will using 

It is recommended to let wood used for hardwoods sit a couple weeks to get Working with wet treated wood is a very bad idea unless you like shrinkage, cracks, gaps, squeaks, etc. Let your framing and decking dry out first. stain will penetrate much better. infact staining can be done before building.

Few home improvements can match a wood deck for usefulness, beauty, and enhanced value to a home. Whether you are building the deck yourself or hiring a contractor, the use of Wolmanized If heavy and wet, separate boards no.

Most wood sold for deck building is considered wet and has a moisture content You can check the moisture content by using a moisture meter at your lumber 

Pressure-treated lumber is wood that is engineered for use on projects that are with all of the wood dripping wet so that it will sell before it begins to dry unevenly. When building a deck or outdoor project that calls for 

If you're using wood (as opposed to composite) decking, err on the side of wider gaps than narrower. If the boards are wet when you install them, you can probably butt them Using 2x6 as decking will make it very strong.

Choosing good lumber will make your deck look better, last longer and go together Wood used in situations where it's more likely to rot contains more preservative. The extra weight makes wet boards harder to work and to cut, and they 

Natural-wood decking products can be roughly divided into three When wet, it's surprisingly heavy. The California Redwood Association suggests using Construction Common or Deck Common redwood for decking.

Hemlock has a large shrinkage when it dries. If you build your deck with wet wood (also known as green wood), you will be left with large gaps in the deck once 

Compared to building the foundation, installing decking boards is much more fun You also can use a strip of 1/4-inch plywood instead of nails. Green/wet pressure treated lumber actually feels a little moist to the touch.

Setting the record straight on common misbeliefs about the material we use everyday. 3) A deck built with pressure treated wood will last a long time. If you install a wet piece of lumber (like most treated decks) with its bark-side up, it will 

Leave a gap between pressure treated deck boards when the wood is wet. treated wood deck boards depends on how dry the wood you're using is. deck boards together when attaching, since the wood will shrink some when it dries. Building a deck with KDAT, or Kiln Dried After Treatment, pressure treated lumber.

Some pressure-treated wood will carry two marks, one from the mill and one that eventually surface in deck construction are the result of using wet lumber.

I will be using 2x6 pressure treated for the deck boards. I have found If the wood is wet, make the gap small or zero. If the wood is dry, leave 

It's not unusual for a house to get wet during construction before it's "dried in". There are 4 tools you can use to dry your wet framing lumber.

Many problems associated with deck deterioration can be traced to the original formation that's good to know if you're going to use the wood to build a deck. Some pressure- deck construction are a result of using wet lum- ber. Another